top of page

Who Should Be Involved in a Control Room Furniture Project?

5 days ago
5 min read
The project team needs to balance operational preferences with safety requirements, technical constraints, maintenance access, construction conditions, and the organization’s long-term standards.
The project team needs to balance operational preferences with safety requirements, technical constraints, maintenance access, construction conditions, and the organization’s long-term standards.

Designing a control room is not simply a matter of selecting consoles and placing them on a floor plan. A successful control room furniture project requires early coordination among the people who operate the room, manage the facility, integrate its technology and approve its construction.


After 30 years of designing control room environments, one lesson remains consistent: the right stakeholders must be involved at the right time. When an essential participant arrives late, the result is often redesign, change orders, installation delays or compromises that affect operators for years.


Here is who should participate in a control room project, what each group contributes and how the team should make and document its decisions.


Who should participate in the initial control room planning stage?

The initial planning team should include representatives from every group that will operate, supervise, support, build or maintain the control room.


The core team typically includes:

  • Front-line operators from different shifts

  • The control room supervisor or operations manager

  • The project manager or owner’s representative

  • Facilities management

  • Health and safety or ergonomics specialists

  • IT and network infrastructure teams

  • AV, SCADA, communications and security integrators

  • Electrical and mechanical engineers

  • The architect or interior designer

  • The control room furniture manufacturer

  • The general contractor, when already selected


Depending on the facility, the project may also require input from cybersecurity, emergency management, business continuity, fire protection and accessibility specialists.


Operators need a meaningful voice, but no single group should design the room alone. The objective is to balance operator comfort and workflow with technical requirements, safety, accessibility, maintenance access, construction conditions and future expansion.

top down view of control room planning document

What information should come directly from control room operators?

Operators understand how the room functions during an actual shift. They can explain which systems they use, which displays must remain visible and which devices they reach for most often.


Their input should cover:

  • Monitor quantities, sizes and preferred arrangement

  • Frequently used keyboards, radios, telephones and pointing devices

  • Required sightlines to video walls, windows, alarms and coworkers

  • Communication between adjacent positions

  • Shift-handover procedures

  • Tasks requiring concentration or collaboration

  • Seated and standing work preferences

  • Glare, noise, heat, cable and legroom problems

  • Differences between normal and emergency operations


Whenever possible, observe operators at work instead of relying exclusively on questionnaires. Even a short observation can reveal awkward reaches, improvised equipment locations or communication patterns that users may not think to mention.

Representatives from day, night and weekend shifts should participate because different teams may use the same control room differently.



What decisions belong to the control room supervisor?

The supervisor or operations manager normally owns the operational requirements. This includes staffing levels, workstation assignments, functional adjacencies, supervisory sightlines, shift changes, access permissions and emergency-response workflows.


The supervisor should also identify requirements for temporary, shared or future positions and decide which operational need takes priority when requests conflict.


However, the supervisor should not make technical or ergonomic decisions alone. A supervisor might determine that an operator needs six monitors and a clear view of the video wall. The furniture manufacturer, ergonomics specialist, IT team and engineers must then develop a solution that is safe, serviceable and technically feasible.


When should architects involve the control room furniture manufacturer?

The furniture manufacturer should be involved during programming or schematic design, before the room dimensions and building services are finalized.


Early involvement helps coordinate:

  • Console footprints and circulation clearances

  • Operator and supervisor sightlines

  • Video-wall viewing angles

  • Accessible workstation requirements

  • Floor-box and cable-entry locations

  • Lighting and monitor glare

  • Equipment ventilation and heat loads

  • Maintenance access

  • Delivery routes, doors and elevators

  • Future workstation expansion


If the furniture manufacturer joins after architectural plans are nearly complete, the team may discover inadequate circulation, misplaced utilities or inaccessible equipment. Ideally, a preliminary furniture layout should be validated before electrical and mechanical systems are designed around it.


3d render of top down layout for Robotics Mission Control Center - Canadian Space Agency
Proposed layout for the Robotics Mission Control Center - Canadian Space Agency.

What information is needed from IT, AV, SCADA and security integrators?

Technology teams must provide more than an equipment list. Each device should be documented by manufacturer, model, quantity, dimensions, weight, power consumption, heat output and mounting method.


The furniture designer also needs cable types, connector sizes, minimum bend radius, rack locations, maximum cable distances and power-data separation requirements. Monitor size, weight and mounting pattern are especially important.


The team should identify who will install and maintain every component. A console may look correct on a drawing but still be unsuccessful if a technician cannot replace a computer, power supply or cable without dismantling the workstation.


A coordinated interface matrix can document each device, its location, power and data connections, heat load, mounting responsibility and maintenance requirements.



When are electrical and mechanical engineers required?

Electrical engineers should review circuit capacity, UPS and emergency power, redundancy, grounding, surge protection, raceways, floor boxes and the separation of power and data cabling.


Mechanical engineers should verify equipment heat loads, air distribution, temperature consistency, humidity, acoustic performance and cooling redundancy. Supply grilles should not create drafts at operator positions, while return-air locations must support effective heat removal.


Lighting also needs coordination. Standard ceiling-light grids can cause reflections on multiple displays. Fixture locations and illumination levels should account for monitor angles, viewing distances and the need for comfortable 24/7 operation.


Who approves the final control room workstation configuration?

Final approval should be multidisciplinary, with one clearly identified operational authority.

Operators validate usability, reach, visibility and workflow. The supervisor approves operational performance. IT and system integrators confirm equipment fit and connectivity.


Engineering and facilities approve building-system coordination. Ergonomics or health and safety representatives verify human-factors requirements. The project manager or owner’s representative then provides formal approval.


For an important or complex control room, the team should test a full-scale mock-up or representative prototype workstation. Rendering software can communicate the design, but it cannot fully demonstrate reach, visibility, maintenance access or posture changes.


What happens when stakeholders join too late?

Late involvement commonly leads to undersized cable pathways, unsupported monitors, misplaced floor boxes, inadequate cooling, obstructed sightlines and inaccessible equipment.


Other problems include missing security devices, insufficient workstation spacing, incorrect operational adjacencies and furniture that cannot pass through the building’s delivery route.


A change that takes minutes during schematic design can require revised shop drawings, replacement components, electrical rework and schedule extensions after manufacturing begins.


How should conflicting requirements and approvals be managed?

The project manager should maintain a requirements matrix rather than collecting disconnected comments by email. Each requirement should identify its requester, operational purpose, priority, technical dependencies, cost or schedule impact, decision owner and approval status.


Requirements can be classified as mandatory, performance-related, preferred, optional or intended for future consideration. Conflicts should be evaluated against operator safety, mission continuity, maintainability, accessibility, technical feasibility, budget and schedule.


Final decisions should be recorded in a controlled decision log supported by meeting minutes, coordinated drawings, equipment schedules and formal sign-offs. Review milestones should include the preliminary layout, coordinated design, mock-up, final shop drawings and production release.


The best control rooms result from collaboration. Operators explain the work, supervisors establish operational priorities, integrators define the technology, engineers protect building performance, architects coordinate the surrounding environment, and the furniture manufacturer turns those requirements into a durable, maintainable workstation.


Your Control Room Starts with the Right Questions

Tell us how your control room operates. Through our Console Survey, you can share details about your current layout, equipment, monitor configuration, operator needs, and future plans. Whether you are replacing existing consoles, expanding your facility, or designing a new room, your answers will give our specialists the information needed to begin a productive discussion. Complete the Console Survey and let’s explore what your ideal control room could look like.


 
 
 

Comments


bottom of page